Plastic - Set of 2
This is a Set of 2 Humbucker Mounting Rings for Standard size Humbucker pickups (such as, Seymour Duncan, Dimarzio, etc...). You will get 1 Front (Thin for Neck Position), and 1 Rear (Thick for Bridge Position). They are the slanted tapered type and the "Front" one is 3mm (1/8inch) on the short side and 5mm (3/16in) on the taller side. The "Rear" one is 7mm (1/4inch) on the short side and 9mm (3/8in) on the taller side. They Standard Flat Bottom Rings and are made for a Flat Top guitar, but do have a little give for a small arch or contour.