Wilkinson "E-Z Lok" Tuners

6 In Line

Designed to work on guitars of all styles “E-Z-Lok” are the ultimate in the quest for perfect tuning stability. Unlike ordinary tuners each E-Z-Lok post has 2 holes. This simple concept transforms each tuner into the tuner you want it to be. Want to string conventionally? then OK do it! Want to change the tension over the nut? OK, use the upper hole to decrease the tension, use the lower hole to increase the tension. Want to stay in tune when using a Vibrato / Tremolo system? Then OK, you can do this too. Eliminating the wraps around a tuner post is a “must do” when using a vibrato system. Thread the string through either top or bottom hole, pull the string tight and make a wrap around the post then thread the remaining string through the second hole pull tight again and you now have a locking tuning key. The string is now firmly attached with less than half a turn around the tuner post when tuned to pitch. They require a standard 10mm Hole for mounting.


1 - Select the desired string angle over the nut and pass string through the upper or lower hole in tuner post
2 - Pull the string tight, make a 90 degree bend in the string as it exits the post
3 - Make one wrap of the string around the post (2 wraps for the thinner strings such as the high E and B)

4 - Pass the remaing length of string through the other hole in tuner post and pull tight
5 - Trim off the excess string and tune to pitch. Stretch string and re-tune.

CHROME BLACK GOLD
$22.99 $23.99 $24.99