Our Humbucker Pickups wire up like many standard pickups. There are hundreds of variations on how to wire a guitar pickup, and there are tons of places online to get all sorts of diagrams. The diagram & info below will show you the wiring color code for the wires, as well as the basic wiring for most of our Humbucker pickups (Alnico Supreme, Z-Bucker. Hexbucker, Gold Rush, Mini Rail Blade Humbucker, & Wood Topped Humbuckers).

A: STANDARD HUMBUCKING WIRING

• GREEN = HOT (usually to your Selector Switch or to the "hot spot" of your Volume Pot)

• BLACK & BARE = GROUND (Ground to the bottom of the Vol or Tone Pot)

• RED & WHITE = Twist/Solder together and tape off

B: PARALLEL HUMBUCKING WIRING

• GREEN & WHITE = HOT (usually to your Selector Switch or to the "hot spot" of your Volume Pot)

• BLACK & RED = GROUND w/ BARE Wire (Ground to the bottom of the Vol or Tone Pot)

C: COIL TAP for HUMBUCKER (using a standard DPDT Mini Switch or Push/Pull Pot)

All Images, Descriptions, Sound Clips, Graphics, and content of this website, are property of GuitarHeads.net (unless otherwise noted). And is not to be copied or reproduced in any way.